|
Post by johnbeers on Mar 7, 2004 20:06:20 GMT -5
I have a 1979 Trailfire 440 Kawasaki motor. Model #TA440A. Does anybody know the correst way to remove the piston? I didn't see a circlip at the ends of the wrist pins. Much appreciated.
|
|
|
Post by Ryan Hausladen on Mar 7, 2004 21:06:09 GMT -5
There are circlips on there, look very closely and you will see them, the best way to remove the pin is to have a piston pin puller, but if you don't have one, you can carefully tap it out with a hammer and a screwdriver, i have done this before just be careful not to bend a rod.
|
|